三菱 MELSECNET10 三菱-MELSECNET10 network 模塊 type 用戶手冊 ( 硬件 )
所屬類別：三菱
>> 伺服驅動器和伺服電機
資料介紹：
CAUTION
z Always connect the FG terminals to the ground using class D (class 3) or
higher grounding exclusively designed for programmable controller.
z When connecting cables to the terminal block for external power supply,
check the rated voltage and terminal layout of the product for correct wiring.
Connecting a cable to power supply of different voltage or incorrect wiring
may cause a fire or fault.
z Tighten terminal screws to the specified torque.
If a terminal screw is not tightened to the specified torque, it the module may
fall out, short circuit, or malfunction.
If a terminal screw is tightened excessively, exceeding the specified torque,
the module may fall out, short circuit, or malfunction due to breakage of the
screw or the module.
z Solder the coaxial cable connector properly. Incomplete soldering may
cause a malfunction.
z Be sure there are no foreign substances such as sawdust or wiring debris
inside the module. Such debris could cause fires, damage, or erroneous
operation.
z Make sure to place the communication and power cables into a duct or
fasten them using a clamp.
Cables not placed in the duct or not clamped may hang or shift, allowing
存儲卡 Q1MEM-64S
Q系列編程器SRAM卡用電池 Q2MEM-BAT
CF卡 GT05-MEM-16GC
CF卡 GT05-MEM-256MC
存儲卡適配器 GT05-MEM-ADPC
MES接口模塊附件 GT05-MEM-256MC
閃存卡 QD81MEM-1GBC
Q系列PLC線性快閃存儲卡 Q2MEM-4MBF
CF卡 GT05-MEM-8GC
模塊 A1SJ71ME81
Q系列編程器SRAM卡用電池 Q3MEM-BAT
Q系列PLC存儲卡用適配器 Q2MEM-ADP
CF卡 GT05-MEM-4GC
模塊 AJ71ME81
Q系列編程器ATA卡 Q2MEM-32MBA
Q系列PLC內存卡 Q3MEM-4MBS
閃存卡 QD81MEM-512MBC
CF卡 GT05-MEM-2GC
MES接口模塊 QJ71MES96
Q系列PLC線性快閃存儲卡 Q2MEM-2MBF
CF卡 GT05-MEM-128MC
閃存卡 QD81MEM-2GBC
Q系列PLC存儲卡 Q3MEM-8MBS
閃存卡 QD81MEM-8GBC
Q系列PLC存儲卡 Q3MEM-4MBS-SET
Q系列PLC內存卡 Q2MEM-2MBS
CF卡 GT05-MEM-1GC
閃存卡 QD81MEM-4GBC
Q系列PLC內存卡 Q2MEM-1MBS
CF卡 GT05-MEM-512MC
上一條：
下一條：相關下載
