三菱 三菱-IB(NA)-0800321E
所屬類別：三菱
>> AJ系列CC-Link模塊
資料介紹：
[Design Precautions]
CAUTION
z Do not bunch the control wires or communication cables with the main circuit
or power wires, or install them close to each other.
They should be installed 100 mm (3.94 inch) or more from each other.
Not doing so could result in noise that would cause erroneous operation.
z At power ON/OFF, voltage or current may instantaneously be output from the
output terminal of this module. In such case, wait until the analog output
becomes stable to start controlling the external device.
轉換電纜 FX2N-CNV-IF
中斷模塊 QI60
模塊 AJ35PP-CNV-SI
電流輸出模擬量模塊 Q68DAIN
AS-I主站模塊 FX2N-32ASI-M
模擬輸出模塊 A616DAI
模塊 AJ35PTC-CNV-GI
模塊 A1SD32ID1
模塊 AD32ID2
模塊 AD32ID1
模塊 AD35ID1
模擬量輸出模塊 A1S68DAI
電流輸入模擬量模塊 Q68ADI
適配器 Q6DIN2
模塊 AJ35PP-CNV-GI
模塊 A1SD32ID2
中繼模塊 AJ65BT-RPI-10B
模塊 A1SJ71ID1-R4
ID接口模塊 QD35ID2
模塊 AJ35PP-CNV-SI
模塊 AD35ID2
外部輸入/輸出單元 GT15-DIO
模擬量輸入模塊 Q68ADV，Q68ADI
ID接口模塊 QD35ID1
模塊 AJ71ID2-R4
模塊 AJ35PP-CNV-GI
模擬量模塊 AJ65BT-64DAI
模擬量模塊 AJ65VBTCU-68ADIN
模塊 A1SD35ID1
速中斷模塊 A1SI61
上一條：
下一條：相關下載
